Advertising:

CAN Bus ID 0x153 ASC1

From MS4X Wiki
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

CAN Arbitration ID for ASC1 is 0x153.

Its sent out by the traction control module at a refresh rate of 10ms for ASC and 20ms for DSC.

  • Byte 0 - Bitfield
    • Bit 0 - LV_ASC_REQ
Demand for ASC intervention
    • Bit 1 - LV_MSR_REQ
Demand for MSR intervention
    • Bit 2 - LV_ASC_PASV
Status ASC passive (for EGS)
    • Bit 3 - LV_ASC_SW_INT
ASC Switching influence
    • Bit 4 - LV_BLS
Status Brake Light Switch
    • Bit 5 - LV_BAS
    • Bit 6 - LV_EBV
    • Bit 7 - LV_ABS_LED
  • Byte 1 - Bitfield
    • Bit 0 - LV_ASC_REQ
    • Bit 1 - LV_MSR_REQ
    • Bit 2 - LV_ASC_PASV
    • Bit 3 - VSS [0]
    • Bit 4 - VSS [1]
    • Bit 5 - VSS [2]
    • Bit 6 - VSS [3]
    • Bit 7 - VSS [4]
  • Byte 2 - VSS [MSB]
    Vehicle speed signal in Km/h
    Calculation = ( (HEX[MSB] * 256) + HEX[LSB]) * 0.0625
    Min: 0x160 (0 Km/h)
  • Byte 3 - MD_IND_ASC
    Torque intervention for ASC function
    Calculation = HEX * 0.390625
    Min: 0x00 (0.0%) max. reductiuon
    Max: 0xFF (99.6094%) no reduction
  • Byte 4 - MD_IND_MSR
    Torque intervention for MSR function
    Calculation = HEX * 0.390625
    Min: 0x00 (0.0%) no engine torque increase
    Max: 0xFF (99.6094%) max engine torque increase
  • Byte 5 - Unused
  • Byte 6 - MD_IND_ASC_LM
    Torque intervention for ASC LM function
    Calculation = HEX * 0.390625
    Min: 0x00 (0.0%) max. reductiuon
    Max: 0xFF (99.6094%) no reduction
  • Byte 7 - ASC ALIVE
    00h - 0Fh
    Alive counter to verify message integrity