Advertising:
Fuel Injector Deadtimes: Difference between revisions
From MS4X Wiki
Line 9: | Line 9: | ||
== Siemens OEM M52TUB20/23/28 == | == Siemens OEM M52TUB20/23/28 == | ||
'''Minimum injection time''': 0.640ms | |||
'''Minimum injection time''': 0.624ms | '''Minimum injection time''': 0.624ms | ||
{| class="wikitable" | {| class="wikitable" |
Revision as of 04:59, 16 August 2018
Every fuel injector type has a unique minimum injection time and latency for it to fully open since energized.
This latency is often referenced as injector lag- or deadtime, latency or delay (ip_ti_add_dly__vb).
It is strongly dependant on the supply voltage and therefore stored in an interpolated table.
The minimum injection time is also important to make sure the injection pattern is clear and complete. (c_ti_min_iv).
Siemens OEM M52TUB20/23/28
Minimum injection time: 0.640ms Minimum injection time: 0.624ms
V | ms |
---|---|
0.0 | 3.65 |
6.0 | 3.65 |
8.0 | 1.84 |
10.0 | 1.23 |
12.0 | 0.81 |
14.0 | 0.55 |
16.0 | 0.39 |
25.0 | 0.06 |
Siemens OEM M54B30
Minimum injection time: 0.725ms
V | ms |
---|---|
0.0 | 4.44 |
6.0 | 4.44 |
8.0 | 1.88 |
10.0 | 1.15 |
12.0 | 0.77 |
14.0 | 0.51 |
16.0 | 0.34 |
25.0 | 0.04 |
Bosch 0280155968 440cc/min 42lb/hr "Green giants"
Minimum injection time: 0.468ms
V | ms |
---|---|
0.0 | 4.986 |
6.0 | 4.986 |
8.0 | 2.098 |
10.0 | 1.321 |
12.0 | 0.919 |
14.0 | 0.670 |
16.0 | 0.47 |
25.0 | 0.47 |
Bosch 0280158123 627cc/min
Minimum injection time: 0.711ms
V | ms |
---|---|
0.0 | 2.94 |
6.0 | 2.94 |
8.0 | 2.94 |
10.0 | 1.58 |
12.0 | 1.15 |
14.0 | 0.73 |
16.0 | 0.55 |
25.0 | 0.55 |
V | ms |
---|---|
7.01 | 2.94 |
10.05 | 1.41 |
12.04 | 1.00 |
14.02 | 0.65 |
16.00 | 0.57 |