Advertising:

Fuel Injector Deadtimes: Difference between revisions

From MS4X Wiki
Line 41: Line 41:
|}
|}


== Bosch 613cc/min (0280158123) ==
== Bosch 627cc/min (0280158123) ==
{| style="width: 100%;"
{| style="width: 100%;"
|
|

Revision as of 12:59, 18 July 2018

Every fuel injector type has a unique minimum injection time and latency for it to fully open since energized.

This latency is often referenced as injector lag- or deadtime, latency or delay (ip_ti_add_dly__vb).

It is strongly dependant on the supply voltage and therefore stored in an interpolated table.

The minimum injection time is also important to make sure the injection pattern is clear and complete. (c_ti_min_iv).


Siemens OEM M54B30

Minimum injection time: 0.499sec

ip_ti_add_dly__vb
V ms
0.0 4.44
6.0 4.44
8.0 1.88
10.0 1.15
12.0 0.77
14.0 0.51
16.0 0.34
25.0 0.04

Bosch 627cc/min (0280158123)

Minimum injection time: 0.499sec
ip_ti_add_dly__vb
V ms
0.0 2.94
6.0 2.94
8.0 2.94
10.0 1.58
12.0 1.15
14.0 0.73
16.0 0.55
25.0 0.55
Bosch 0280158123 Injector