Advertising:
TunerPro ME7.2 V8 Community Patchlist: Difference between revisions
No edit summary |
No edit summary |
||
Line 6: | Line 6: | ||
'''Important Notes:''' | '''Important Notes:''' | ||
* | *Bootmode flashing with JMGarage Flasher is needed when you want to use this patchlist for now. | ||
'''Download it here: [[:File:MS4X_Bosch_ME7.2_V8_Community_Patchlist_v0.1.xdf|MS4X_Bosch_ME7.2_V8_Community_Patchlist_v0.1.xdf]]''' | '''Download it here: [[:File:MS4X_Bosch_ME7.2_V8_Community_Patchlist_v0.1.xdf|MS4X_Bosch_ME7.2_V8_Community_Patchlist_v0.1.xdf]]''' |
Revision as of 17:17, 14 June 2021
TunerPro offers a very good method of editing flash files with its "Patch" function.
We used this feature to create an "All-In-One" solution for editing engine displacement independent functions, like Launch Control, EWS Delete, M3 Cluster functionality etc.
Important Notes:
- Bootmode flashing with JMGarage Flasher is needed when you want to use this patchlist for now.
Download it here: MS4X_Bosch_ME7.2_V8_Community_Patchlist_v0.1.xdf
ECU Information
This section shows the first entry of the user information fields (UIF), the ECU number, the ISN and most important the softwareversion.
Please keep in mind, that the show UIF values does not necessarely have to be true, as some dealership did not write the UIF section after updating the ECU during service.
- Bosch Part Number
- Program Code Version
- Data Area Version
- ISN Value
- UIF Vehicle Identification Number
- UIF Flash Date
- UIF Software Number
- UIF Service Number
- UIF Assembly Number
Immobilizer Bypass
Parameters
- [PATCH] Immobilizer Bypass - Bypasses the immobilizer checks of the ECU
- [PATCH] Clear Immobilizer Data - Virginizes the ECU by clearing all immobilizer related data
Explanation
This will bypass immobilizer checks that are made to prevent the car from starting with an unauthorized key or no key at all.
Note: On some cars it takes some time to start during the first crank. So crank it a bit longer than you are used to if the engine isn't starting up right away.
When virginzing the ECU by clearing the immobilizer data you want to overwrite data in the bootloader area, so bootmode flashing is needed.
To synchronize ISN and rolling codes between the ECU and the EWS3 module just use INPA or MS4X Dev Flasher.
Checksum Bypass
not ready yet
M Instrument Cluster LEDs
Parameters
tba
Explanation
tba