Advertising:

TunerPro MS43 Community Patchlist: Difference between revisions

From MS4X Wiki
Line 32: Line 32:


=M3/M5 Cluster LEDs=
=M3/M5 Cluster LEDs=
*'''[PATCH] M3/M5 Cluster LED Mod''' - Implements code that controls the LEDs of the M3 cluster to act like in an E46 M3 or E39 M5
*'''ldpm_toil_led''' - Oil temperatur axis to adjust the switch points of the led array for the warmup light feature
*'''ldpm_n_led''' - Engine Speed axis to adjust the switch points of the led array for the shift light feature
*'''id_icl_toil_led__n''' -
*'''id_icl_n_led__n''' -
112 - all LEDs lit 111****
96 - 4500 and upwards - 110****
80 - 5000 and upwards - 101****
64 - 5500 and upwards - 100****
48 - 6000 and upwards - 011****
32 - 6500 and upwards - 010****
16 - 7000 and upwards - 001****
0 - 7500 lit
1 - oil warning LED yellow
4 - coolant warning LED
=Extended DS2 Logging=
=Extended DS2 Logging=
*'''[PATCH] DS2 Logging Feature Enhancement''' - Implements a new DS2 logging command
*'''[PATCH] DS2 Logging Feature Enhancement''' - Implements a new DS2 logging command

Revision as of 20:51, 19 May 2019

TunerPro offers a very good method of editing flash files with its "Patch" function.

We used this feature to create an "All-In-One" solution for editing engine displacement independant functions, like EWS or checklsum delete, M3 cluster warumup and shiftlights,etc.

MS4X MS430069 Community Patchlist.png


ECU Information

  • UIF Vehicle Identification Number
  • UIF Software Number
  • UIF Service Number
  • UIF Assembly Number
  • ECU Number
  • ISN Value
  • Softwareversion

Immobilizer Bypass

  • Immobilizer Bypass - Disables the EWS / immobilizer checks of the ecu
  • Clear Immobilizer Data - Clear all EWS / immobilizer related data to realign the ECU with EWS module via INPA. Requires bootmode flash!

Checksum Bypass

  • Checksum Bypass - Disables both checksums for the calibration data section

Launch Control

  • [PATCH] Launch Control - Implements a launch control that sets an additional revlimiter while meeting the following calibration values
  • c_conf_lc - Configuration switch to enable or disable the launch control feature
  • c_n_lc_max - Maximum engine speed while the launch control is engaged
  • c_pvs_lc_min - Minimum accellerator pedal position for the launch control to be engaged
  • c_vs_lc_max - Maximum vehicle speed for the launch control to be engaged
  • c_tco_lc_min - Minimum coolant temperature for the launch control to be engaged

M3/M5 Cluster LEDs

  • [PATCH] M3/M5 Cluster LED Mod - Implements code that controls the LEDs of the M3 cluster to act like in an E46 M3 or E39 M5
  • ldpm_toil_led - Oil temperatur axis to adjust the switch points of the led array for the warmup light feature
  • ldpm_n_led - Engine Speed axis to adjust the switch points of the led array for the shift light feature
  • id_icl_toil_led__n -
  • id_icl_n_led__n -

112 - all LEDs lit 111**** 96 - 4500 and upwards - 110**** 80 - 5000 and upwards - 101**** 64 - 5500 and upwards - 100**** 48 - 6000 and upwards - 011**** 32 - 6500 and upwards - 010**** 16 - 7000 and upwards - 001****

0 - 7500 lit
1 - oil warning LED yellow
4 - coolant warning LED

Extended DS2 Logging

  • [PATCH] DS2 Logging Feature Enhancement - Implements a new DS2 logging command

This patch contains a new logging command (0B B0) that extends the stock (0B 03) with the following values:

  • Ignition timing for all cylinders
  • Fuel injector pulse width for bank 2
  • Calculated manifold air pressure
  • Active VO table
  • Filtered load values
  • Calculated gear
  • Rear O2 voltage input

MAF Sensor Hack

  • [PATCH] MAF Sensor Hack 2048kg/h - Double the airflow capability of the ECU to 2048kg/h. Use following tables to edit MAF sensor scale.
  • id_maf_tab - MAF sensor table 1x256
  • id_maf_tab - MAF sensor table 16x16