Advertising:

TunerPro MS43 Community Patchlist

From MS4X Wiki

TunerPro offers a very good method of editing flash files with its "Patch" function.

We used this feature to create an "All-In-One" solution for editing engine displacement independant functions, like EWS or checklsum delete, M3 cluster warumup and shiftlights,etc.

MS4X MS430069 Community Patchlist.png


ECU Information

Community Patchlist ECU Information.png

This section shows most of the user information field (UIF), the ECU number, the ISN and most important the softwareversion.

  • UIF Vehicle Identification Number
  • UIF Software Number
  • UIF Service Number
  • UIF Assembly Number
  • ECU Number
  • ISN Value
  • Softwareversion

Immobilizer Bypass

  • Immobilizer Bypass - Disables the EWS / immobilizer checks of the ecu
  • Clear Immobilizer Data - Clear all EWS / immobilizer related data to realign the ECU with EWS module via INPA. Requires bootmode flash!

Checksum Bypass

  • Checksum Bypass - Disables both checksums for the calibration data section

Launch Control

  • [PATCH] Launch Control - Implements a launch control that sets an additional revlimiter while meeting the following calibration values
  • c_conf_lc - Configuration switch to enable or disable the launch control feature
  • c_n_lc_max - Maximum engine speed while the launch control is engaged
  • c_pvs_lc_min - Minimum accellerator pedal position for the launch control to be engaged
  • c_vs_lc_max - Maximum vehicle speed for the launch control to be engaged
  • c_tco_lc_min - Minimum coolant temperature for the launch control to be engaged

M3/M5 Cluster LEDs

  • [PATCH] M3/M5 Cluster LED Mod - Implements code that controls the LEDs of the M3 cluster to act like in an E46 M3 or E39 M5
  • ldpm_toil_led - Oil temperatur axis to adjust the switch points of the led array for the warmup light feature
  • id_icl_toil_led__n - LEDs used at the given oil tempetature for the warmup light feature
  • ldpm_toil_led - Engine Speed axis to adjust the switch points of the led array for the shift light feature
  • id_icl_led__n - LEDs used at the given enginespeed for the shift light feature

For an explaination of the values see M Cluster LED Control

Extended DS2 Logging

  • [PATCH] DS2 Logging Feature Enhancement - Implements a new DS2 logging command

This patch contains a new logging command (0B B0) that extends the stock (0B 03) with the following values:

  • Ignition timing for all cylinders
  • Fuel injector pulse width for bank 2
  • Calculated manifold air pressure
  • Active VO table
  • Filtered load values
  • Calculated gear
  • Rear O2 voltage input

MAF Sensor Hack

  • [PATCH] MAF Sensor Hack 2048kg/h - Double the airflow capability of the ECU to 2048kg/h. Use following tables to edit MAF sensor scale.
  • id_maf_tab - MAF sensor table 1x256
  • id_maf_tab - MAF sensor table 16x16