Advertising:
CAN Bus ID 0x130: Difference between revisions
From MS4X Wiki
(Created page with "Terminal status (KLEMMENSTATUS) Refresh Rate: 100ms *'''Byte 0 - Bitfield''' **'''Bit 0 - ST_KL_R [0]''' **'''Bit 1 - ST_KL_R [1]''' **: Status Terminal R **: 0x00 = Terminal Off **: 0x01 = Terminal On **: 0x02 = Invalid signal **'''Bit 2 - ST_KL_15 [0]''' **'''Bit 3 - ST_KL_15 [1]''' **: Status Terminal 15 **: 0x00 = Terminal Off **: 0x01 = Terminal On **: 0x02 = Invalid signal **'''Bit 4 - ST_KL_50 [0]''' **'''Bit 5 - ST_KL_50 [1]''' **: Status Terminal 50 (starter r...") |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Terminal status (KLEMMENSTATUS) | Terminal status (KLEMMENSTATUS) BN2000 | ||
Refresh Rate: 100ms | Refresh Rate: 100ms | ||
| Line 15: | Line 15: | ||
**: 0x00 = Terminal Off | **: 0x00 = Terminal Off | ||
**: 0x01 = Terminal On | **: 0x01 = Terminal On | ||
**'''Bit 4 - ST_KL_50 [0]''' | **'''Bit 4 - ST_KL_50 [0]''' | ||
**'''Bit 5 - ST_KL_50 [1]''' | **'''Bit 5 - ST_KL_50 [1]''' | ||
| Line 21: | Line 20: | ||
**: 0x00 = Terminal Off | **: 0x00 = Terminal Off | ||
**: 0x01 = Terminal On (starter engaged) | **: 0x01 = Terminal On (starter engaged) | ||
**'''Bit 6 - ST_KEY_VLD [0]''' | **'''Bit 6 - ST_KEY_VLD [0]''' | ||
**'''Bit 7 - ST_KEY_VLD [1]''' | **'''Bit 7 - ST_KEY_VLD [1]''' | ||
| Line 27: | Line 25: | ||
**: 0x00 = Key Not Valid | **: 0x00 = Key Not Valid | ||
**: 0x01 = Key Valid | **: 0x01 = Key Valid | ||
**: | *'''Byte 1 - Key Info''' | ||
**'''Bit 0 - NO_KEY [0]''' | |||
**'''Bit 1 - NO_KEY [1]''' | |||
**'''Bit 2 - NO_KEY [0]''' | |||
**'''Bit 3 - NO_KEY [1]''' | |||
**: 0x00 - 0x0F = vehicle key number | |||
**'''Bit 4 - ST_KEY_TYP [0]''' | |||
**'''Bit 5 - ST_KEY_TYP [1]''' | |||
**'''Bit 6 - ST_KEY_TYP [0]''' | |||
**'''Bit 7 - ST_KEY_TYP [1]''' | |||
**: 0x00 - 0x0F = vehicle key type? (not used in MS45) | |||
*'''Byte 2 - Bitfield''' (not used in MS45) | |||
**'''Bit 0 - ST_KEY_PLGD [0]''' | |||
**'''Bit 1 - ST_KEY_PLGD [1]''' | |||
**'''Bit 2 - ST_VHIM [0]''' | |||
**'''Bit 3 - ST_VHIM [1]''' | |||
**'''Bit 4 - ST_LOKG_STCO [0]''' | |||
**'''Bit 5 - ST_LOKG_STCO [1]''' | |||
**'''Bit 6 - ST_KLCK [0]''' | |||
**'''Bit 7 - ST_KLCK [1]''' | |||
*'''Byte 3 - Bitfield''' (not used in MS45) | |||
**'''Bit 0 - PO_ID_PU [0]''' | |||
**'''Bit 1 - PO_ID_PU [1]''' | |||
**'''Bit 2 - ST_PSVA_ACV [0]''' | |||
**'''Bit 3 - ST_PSVA_ACV [1]''' | |||
**'''Bit 4 - ST_ILK_COD_BM [0]''' | |||
**'''Bit 5 - ST_ILK_COD_BM [1]''' | |||
**'''Bit 6 - Unused''' | |||
**'''Bit 7 - Unused''' | |||
*'''Byte 4 - Checksum''' | |||
**'''Bit 0 - ALIV_KL [0]''' | |||
**'''Bit 1 - ALIV_KL [1]''' | |||
**'''Bit 2 - ALIV_KL [2]''' | |||
**'''Bit 3 - ALIV_KL [3]''' | |||
**: 0x00 - 0x0E = CAS alive counter | |||
**'''Bit 4 - CHKSM_KL [0]''' | |||
**'''Bit 5 - CHKSM_KL [1]''' | |||
**'''Bit 6 - CHKSM_KL [2]''' | |||
**'''Bit 7 - CHKSM_KL [3]''' | |||
**: 0x00 - 0x0F = Checksum CAS | |||
Latest revision as of 09:31, 28 April 2024
Terminal status (KLEMMENSTATUS) BN2000
Refresh Rate: 100ms
- Byte 0 - Bitfield
- Bit 0 - ST_KL_R [0]
- Bit 1 - ST_KL_R [1]
- Status Terminal R
- 0x00 = Terminal Off
- 0x01 = Terminal On
- 0x02 = Invalid signal
- Bit 2 - ST_KL_15 [0]
- Bit 3 - ST_KL_15 [1]
- Status Terminal 15
- 0x00 = Terminal Off
- 0x01 = Terminal On
- Bit 4 - ST_KL_50 [0]
- Bit 5 - ST_KL_50 [1]
- Status Terminal 50 (starter relay)
- 0x00 = Terminal Off
- 0x01 = Terminal On (starter engaged)
- Bit 6 - ST_KEY_VLD [0]
- Bit 7 - ST_KEY_VLD [1]
- Status Key Valid (not used in MS45)
- 0x00 = Key Not Valid
- 0x01 = Key Valid
- Byte 1 - Key Info
- Bit 0 - NO_KEY [0]
- Bit 1 - NO_KEY [1]
- Bit 2 - NO_KEY [0]
- Bit 3 - NO_KEY [1]
- 0x00 - 0x0F = vehicle key number
- Bit 4 - ST_KEY_TYP [0]
- Bit 5 - ST_KEY_TYP [1]
- Bit 6 - ST_KEY_TYP [0]
- Bit 7 - ST_KEY_TYP [1]
- 0x00 - 0x0F = vehicle key type? (not used in MS45)
- Byte 2 - Bitfield (not used in MS45)
- Bit 0 - ST_KEY_PLGD [0]
- Bit 1 - ST_KEY_PLGD [1]
- Bit 2 - ST_VHIM [0]
- Bit 3 - ST_VHIM [1]
- Bit 4 - ST_LOKG_STCO [0]
- Bit 5 - ST_LOKG_STCO [1]
- Bit 6 - ST_KLCK [0]
- Bit 7 - ST_KLCK [1]
- Byte 3 - Bitfield (not used in MS45)
- Bit 0 - PO_ID_PU [0]
- Bit 1 - PO_ID_PU [1]
- Bit 2 - ST_PSVA_ACV [0]
- Bit 3 - ST_PSVA_ACV [1]
- Bit 4 - ST_ILK_COD_BM [0]
- Bit 5 - ST_ILK_COD_BM [1]
- Bit 6 - Unused
- Bit 7 - Unused
- Byte 4 - Checksum
- Bit 0 - ALIV_KL [0]
- Bit 1 - ALIV_KL [1]
- Bit 2 - ALIV_KL [2]
- Bit 3 - ALIV_KL [3]
- 0x00 - 0x0E = CAS alive counter
- Bit 4 - CHKSM_KL [0]
- Bit 5 - CHKSM_KL [1]
- Bit 6 - CHKSM_KL [2]
- Bit 7 - CHKSM_KL [3]
- 0x00 - 0x0F = Checksum CAS
