Advertising:

CAN Bus ID 0x130

From MS4X Wiki
Revision as of 09:18, 23 April 2024 by Pazi88 (talk | contribs) (Created page with "Terminal status (KLEMMENSTATUS) Refresh Rate: 100ms *'''Byte 0 - Bitfield''' **'''Bit 0 - ST_KL_R [0]''' **'''Bit 1 - ST_KL_R [1]''' **: Status Terminal R **: 0x00 = Terminal Off **: 0x01 = Terminal On **: 0x02 = Invalid signal **'''Bit 2 - ST_KL_15 [0]''' **'''Bit 3 - ST_KL_15 [1]''' **: Status Terminal 15 **: 0x00 = Terminal Off **: 0x01 = Terminal On **: 0x02 = Invalid signal **'''Bit 4 - ST_KL_50 [0]''' **'''Bit 5 - ST_KL_50 [1]''' **: Status Terminal 50 (starter r...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Terminal status (KLEMMENSTATUS)

Refresh Rate: 100ms

  • Byte 0 - Bitfield
    • Bit 0 - ST_KL_R [0]
    • Bit 1 - ST_KL_R [1]
      Status Terminal R
      0x00 = Terminal Off
      0x01 = Terminal On
      0x02 = Invalid signal
    • Bit 2 - ST_KL_15 [0]
    • Bit 3 - ST_KL_15 [1]
      Status Terminal 15
      0x00 = Terminal Off
      0x01 = Terminal On
      0x02 = Invalid signal
    • Bit 4 - ST_KL_50 [0]
    • Bit 5 - ST_KL_50 [1]
      Status Terminal 50 (starter relay)
      0x00 = Terminal Off
      0x01 = Terminal On (starter engaged)
      0x02 = Invalid signal
    • Bit 6 - ST_KEY_VLD [0]
    • Bit 7 - ST_KEY_VLD [1]
      Status Key Valid (not used in MS45)
      0x00 = Key Not Valid
      0x01 = Key Valid
      0x02 = Invalid signal
Retrieved from "https://www.ms4x.net/index.php?title=CAN_Bus_ID_0x130&oldid=22991"