CAN Bus ID 0x130

Terminal status (KLEMMENSTATUS)

Refresh Rate: 100ms

• Byte 0 - Bitfield
  • Bit 0 - ST_KL_R [0]
  • Bit 1 - ST_KL_R [1]

    Status Terminal R

    0x00 = Terminal Off

    0x01 = Terminal On

    0x02 = Invalid signal

  • Bit 2 - ST_KL_15 [0]
  • Bit 3 - ST_KL_15 [1]

    Status Terminal 15

    0x00 = Terminal Off

    0x01 = Terminal On

  • Bit 4 - ST_KL_50 [0]
  • Bit 5 - ST_KL_50 [1]

    Status Terminal 50 (starter relay)

    0x00 = Terminal Off

    0x01 = Terminal On (starter engaged)

  • Bit 6 - ST_KEY_VLD [0]
  • Bit 7 - ST_KEY_VLD [1]

    Status Key Valid (not used in MS45)

    0x00 = Key Not Valid

    0x01 = Key Valid

• Byte 1 - Key Info
  • Bit 0 - NO_KEY [0]
  • Bit 1 - NO_KEY [1]
  • Bit 2 - NO_KEY [0]
  • Bit 3 - NO_KEY [1]

    0x00 - 0x0F = vehicle key number

  • Bit 4 - ST_KEY_TYP [0]
  • Bit 5 - ST_KEY_TYP [1]
  • Bit 6 - ST_KEY_TYP [0]
  • Bit 7 - ST_KEY_TYP [1]

    0x00 - 0x0F = vehicle key type? (not used in MS45)

• Byte 2 - Bitfield (not used in MS45)
  • Bit 0 - ST_KEY_PLGD [0]
  • Bit 1 - ST_KEY_PLGD [1]
  • Bit 2 - ST_VHIM [0]
  • Bit 3 - ST_VHIM [1]
  • Bit 4 - ST_LOKG_STCO [0]
  • Bit 5 - ST_LOKG_STCO [1]
  • Bit 6 - ST_KLCK [0]
  • Bit 7 - ST_KLCK [1]
• Byte 3 - Bitfield (not used in MS45)
  • Bit 0 - PO_ID_PU [0]
  • Bit 1 - PO_ID_PU [1]
  • Bit 2 - ST_PSVA_ACV [0]
  • Bit 3 - ST_PSVA_ACV [1]
  • Bit 4 - ST_ILK_COD_BM [0]
  • Bit 5 - ST_ILK_COD_BM [1]
  • Bit 6 - Unused
  • Bit 7 - Unused
• Byte 4 - Checksum
  • Bit 0 - ALIV_KL [0]
  • Bit 1 - ALIV_KL [1]
  • Bit 2 - ALIV_KL [0]
  • Bit 3 - ALIV_KL [1]

    0x00 - 0x0E = CAS alive counter

  • Bit 4 - CHKSM_KL [0]
  • Bit 5 - CHKSM_KL [1]
  • Bit 6 - CHKSM_KL [0]
  • Bit 7 - CHKSM_KL [1]

    0x00 - 0x0F = Checksum CAS