Advertising:
CAN Bus ID 0x130: Difference between revisions
From MS4X Wiki
(Created page with "Terminal status (KLEMMENSTATUS) Refresh Rate: 100ms *'''Byte 0 - Bitfield''' **'''Bit 0 - ST_KL_R [0]''' **'''Bit 1 - ST_KL_R [1]''' **: Status Terminal R **: 0x00 = Terminal Off **: 0x01 = Terminal On **: 0x02 = Invalid signal **'''Bit 2 - ST_KL_15 [0]''' **'''Bit 3 - ST_KL_15 [1]''' **: Status Terminal 15 **: 0x00 = Terminal Off **: 0x01 = Terminal On **: 0x02 = Invalid signal **'''Bit 4 - ST_KL_50 [0]''' **'''Bit 5 - ST_KL_50 [1]''' **: Status Terminal 50 (starter r...") |
(No difference)
|
Revision as of 09:18, 23 April 2024
Terminal status (KLEMMENSTATUS)
Refresh Rate: 100ms
- Byte 0 - Bitfield
- Bit 0 - ST_KL_R [0]
- Bit 1 - ST_KL_R [1]
- Status Terminal R
- 0x00 = Terminal Off
- 0x01 = Terminal On
- 0x02 = Invalid signal
- Bit 2 - ST_KL_15 [0]
- Bit 3 - ST_KL_15 [1]
- Status Terminal 15
- 0x00 = Terminal Off
- 0x01 = Terminal On
- 0x02 = Invalid signal
- Bit 4 - ST_KL_50 [0]
- Bit 5 - ST_KL_50 [1]
- Status Terminal 50 (starter relay)
- 0x00 = Terminal Off
- 0x01 = Terminal On (starter engaged)
- 0x02 = Invalid signal
- Bit 6 - ST_KEY_VLD [0]
- Bit 7 - ST_KEY_VLD [1]
- Status Key Valid (not used in MS45)
- 0x00 = Key Not Valid
- 0x01 = Key Valid
- 0x02 = Invalid signal