Advertising:
Gauge-Temperature-Repair: Difference between revisions
From MS4X Wiki
(Created page with "If your Gauge Cluster is showing 50 Celsius as temperature, you can try the following fixxes: thumb thumb") |
No edit summary |
||
| Line 1: | Line 1: | ||
If your Gauge Cluster is showing 50 Celsius as temperature, you can try the following fixxes: | If your Gauge Cluster is showing 50 Celsius as temperature, you can try the following fixxes: | ||
1. Check if R1 and R2 have correct Ohm Values with your multimeter. Replace if they are not. Small tolerances(10-20%) are okey. | |||
2. Check if Temp VCC is connected to R1 and R2 correctly. If broken, do a fly wire to connect them correctly | |||
3. Check if Temp-GND Pin is connected to Ground. If not, apply fix like in Picture | |||
[[File:Temp1.jpg|thumb]] | [[File:Temp1.jpg|thumb]] | ||
[[File:Temp2.jpg|thumb]] | [[File:Temp2.jpg|thumb]] | ||
Revision as of 12:27, 10 April 2022
If your Gauge Cluster is showing 50 Celsius as temperature, you can try the following fixxes:
1. Check if R1 and R2 have correct Ohm Values with your multimeter. Replace if they are not. Small tolerances(10-20%) are okey.
2. Check if Temp VCC is connected to R1 and R2 correctly. If broken, do a fly wire to connect them correctly
3. Check if Temp-GND Pin is connected to Ground. If not, apply fix like in Picture
