Advertising:
Additional Analog Inputs For Logging With MS43: Difference between revisions
From MS4X Wiki
No edit summary |
No edit summary |
||
| Line 4: | Line 4: | ||
For logging these inputs we recommend using TunerPro and the [[TunerPro_MS43_Community_Patchlist#DS2_Logging_Extensions|extended logging you can find in our patchlist for MS43]]. | For logging these inputs we recommend using TunerPro and the [[TunerPro_MS43_Community_Patchlist#DS2_Logging_Extensions|extended logging you can find in our patchlist for MS43]]. | ||
==Additional Inputs Available Without Modification== | |||
==Additional Inputs Available With Software Modification== | |||
==Additional Inputs Available With Hardware Modification== | |||
Revision as of 19:05, 23 January 2023
In this article we will take a look at MS43s additional analog input possibilities that we can use to log additional sensor data with and maybe use for tuning in the future.
All of the following inputs are capable of measuring an analog 0-5V signal with with an accuracy of 4.8828125mV. If you want to log 12V sensors you need an addtional voltage devider circuit.
For logging these inputs we recommend using TunerPro and the extended logging you can find in our patchlist for MS43.
