Advertising:

CobraRTP Flash Online: Difference between revisions

From MS4X Wiki
Line 20: Line 20:
[[File:Cobra RTP Prepare 06.png|480px|frameless|none|Secure the emulator case to the ECU main connector]]
[[File:Cobra RTP Prepare 06.png|480px|frameless|none|Secure the emulator case to the ECU main connector]]


[[File:Cobra RTP Prepare 07.png|480px|frameless|none|Secure the emulator case to the ECU main connector]]
[[File:Cobra RTP Prepare 07.png|480px|frameless|none|Finished]]


[[File:Cobra RTP Prepare 08.png|480px|frameless|none|Secure the emulator case to the ECU main connector]]
[[File:Cobra RTP Prepare 08.png|480px|frameless|none|Finished with cable]]


== Software Preparation ==
== Software Preparation ==


==== Optional: Module Update ====
==== Optional: Module Update ====

Revision as of 19:49, 16 February 2022

Flash Online from CobraRTP is a flash chip emulator that can emulate the following modules: AM28F200, AM28F400 / AM29F200, AM29F400, AM29F800.

You can find all the latest information of the device at the product page here: https://cobrartp.com/en/store/flashonline/

For any kind of downloads (manual, firmware updates, software utility) go to: https://cobrartp.com/en/downloads/

This article shows how to setup a working live tuning environment for Siemens MS43, but other ECUs may be similar.

Hardware Preparation

Desolder the flash module
Remove old solder from the pads
Align the break out adapter
Carefully solder the adapter to the PCB
Original orientation of the flash module
Secure the emulator case to the ECU main connector
Finished
Finished with cable

Software Preparation

Optional: Module Update