Advertising:
Fuel Injector Deadtimes: Difference between revisions
From MS4X Wiki
Line 10: | Line 10: | ||
== Siemens OEM M54B30 == | == Siemens OEM M54B30 == | ||
'''Minimum injection time''': 0. | '''Minimum injection time''': 0.725sec | ||
{| class="wikitable" | {| class="wikitable" | ||
|+ip_ti_add_dly__vb | |+ip_ti_add_dly__vb |
Revision as of 13:16, 18 July 2018
Every fuel injector type has a unique minimum injection time and latency for it to fully open since energized.
This latency is often referenced as injector lag- or deadtime, latency or delay (ip_ti_add_dly__vb).
It is strongly dependant on the supply voltage and therefore stored in an interpolated table.
The minimum injection time is also important to make sure the injection pattern is clear and complete. (c_ti_min_iv).
Siemens OEM M54B30
Minimum injection time: 0.725sec
V | ms |
---|---|
0.0 | 4.44 |
6.0 | 4.44 |
8.0 | 1.88 |
10.0 | 1.15 |
12.0 | 0.77 |
14.0 | 0.51 |
16.0 | 0.34 |
25.0 | 0.04 |
Bosch 627cc/min (0280158123)
Minimum injection time: 0.499sec
|