Advertising:

MS4x Flasher Beta Testing

From MS4X Wiki
Revision as of 23:12, 6 February 2023 by Sda2 (talk | contribs) (Created page with "<div style="float:right;">__TOC__</div> We are proud to present our own flash tool that you can use to quickly read and write MS42 and MS43 ECUs and GS8.60.x, GS20 and SMG2 TCUs. This tool is completely free of charge, though if you are using it commercially consider a small donation to support this project. '''Key features:''' *On-the-fly checksum correction before flashing *Checksum correction for local files *EWS3 sync and reset *Adaptations reset *DTC read and cle...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

We are proud to present our own flash tool that you can use to quickly read and write MS42 and MS43 ECUs and GS8.60.x, GS20 and SMG2 TCUs.

This tool is completely free of charge, though if you are using it commercially consider a small donation to support this project.

Key features:

  • On-the-fly checksum correction before flashing
  • Checksum correction for local files
  • EWS3 sync and reset
  • Adaptations reset
  • DTC read and clear
  • DS2 command sender
  • 64 KByte read/write (~20 seconds)
  • 512 KByte read/write (~120 seconds)


Download:


MS4X Flasher Unactivated.png

Changelog

v1.3.0 RC2

  • Reworked dumping logic

v1.3.0 RC1

  • Installers for all supported platforms
  • Application no longer relies on the FTDI driver
  • Fully migrated to .NET 7

v1.3.0 beta 2

  • Optimization: Extended the timeout time when erasing to give the control unit more time finish the operation as some units seems to require more time.

v1.3.0 beta 1

  • Added: Support for TCU:s
  • Updated: Migrated to .NET6
  • Updated: Flasher now identifies binary files by hardware ID to remove need to maintain a list of supported firmware versions
  • Optimization: Large refactoring to optimize memory usage and performance
  • Optimization: Refactored loading of FTDI binaries to make it possible to display in the GUI when there aren't installed any FTDI drivers

v1.2.7

  • Added: Support for multi byte ecu addresses
  • Updated: Migrated to .NET5
  • Updated: FTDI drivers 2.12.36.4 included
  • Optimization: Minor bugfixes

v1.1.3

  • Added: Action log
  • Added: Checksum corrector for local files
  • Added: DTC reader (with raw HEX output)
  • Optimization: Various bugfixes

v1.03

  • Optimization: New encryption settings for less AV false positives

v1.02

  • Updated: Icon changed to new logo
  • Optimization: MS42 fullflash bug fixed
  • Optimization: Minor spelling fixes

v1.01

  • Updated: Hardware ID will show at startup if an FTDI cable is detected

v1.0

  • Initial release
Retrieved from "https://www.ms4x.net/index.php?title=MS4x_Flasher_Beta_Testing&oldid=22072"