Advertising:
Siemens MS43 Pinout: Difference between revisions
From MS4X Wiki
No edit summary |
No edit summary |
||
| Line 81: | Line 81: | ||
| style="font-weight:bold;" | A/E | | style="font-weight:bold;" | A/E | ||
| Signal CAN bus low | | Signal CAN bus low | ||
| Transmission control unit | | Transmission control unit (AT only) | ||
|- | |- | ||
| style="font-weight:bold;" | 4 | | style="font-weight:bold;" | 4 | ||
| style="font-weight:bold;" | A/E | | style="font-weight:bold;" | A/E | ||
| Signal CAN bus high | | Signal CAN bus high | ||
| Transmission control unit | | Transmission control unit (AT only) | ||
|- | |- | ||
| style="font-weight:bold;" | 5 | | style="font-weight:bold;" | 5 | ||
| Line 96: | Line 96: | ||
| style="font-weight:bold;" | A/E | | style="font-weight:bold;" | A/E | ||
| Signal Diagnostic link TXD | | Signal Diagnostic link TXD | ||
| Transmission control unit | | Transmission control unit (AT only) | ||
|- | |- | ||
| style="font-weight:bold;" | 7 | | style="font-weight:bold;" | 7 | ||
Revision as of 13:21, 14 November 2018
| X60001 | |||
|---|---|---|---|
| Pin | Type | Description / Signal type | Connection / Measuring notes |
| 1 | A | Terminal 15 | Relay, fuel injectors |
| 2 | Not used | ||
| 3 | A/E | Signal Diagnostic link TXD | K-Line |
| 4 | M | Ground | Ground connector |
| 5 | M | Ground | Ground connector |
| 6 | M | Ground | Ground connector |
| 7 | E | Terminal 30 | B+ terminal |
| 8 | E | Voltage supply | Fuse carrier, engine electronics |
| 9 | Not used | ||
| X60002 | |||
|---|---|---|---|
| Pin | Type | Description / Signal type | Connection / Measuring notes |
| 1 | E | Signal Oxygen sensor heater in front of catalytic converter | Heated oxygen sensor 1 in front of catalytic converter |
| 2 | Not used | ||
| 3 | A/E | Signal CAN bus low | Transmission control unit (AT only) |
| 4 | A/E | Signal CAN bus high | Transmission control unit (AT only) |
| 5 | Not used | ||
| 6 | A/E | Signal Diagnostic link TXD | Transmission control unit (AT only) |
| 7 | E | Signal Oxygen sensor heater behind catalytic converter | Heated oxygen sensor 1 in front of catalytic converter |
| 8 | Not used | ||
| 9 | Not used | ||
| 10 | Not used | ||
| 11 | Not used | ||
| 12 | Not used | ||
| 13 | E | Signal Oxygen sensor heater in front of catalytic converter | Heated oxygen sensor 2 in front of catalytic converter |
| 14 | E | Signal Oxygen sensor before catalytic converter | Heated oxygen sensor 1 in front of catalytic converter |
| 15 | E | Signal Oxygen sensor before catalytic converter | Heated oxygen sensor 2 in front of catalytic converter |
| 16 | E | Signal Oxygen sensor after catalytic converter | Heated oxygen sensor 1 behind catalytic converter |
| 17 | Not used | ||
| 18 | E | Signal Oxygen sensor after catalytic converter | Heated oxygen sensor 2 behind catalytic converter |
| 19 | E | Signal Oxygen sensor heater behind catalytic converter | Heated oxygen sensor 2 behind catalytic converter |
| 20 | M | Ground Oxygen sensor before catalytic converter | Heated oxygen sensor 1 in front of catalytic converter |
| 21 | M | Ground Oxygen sensor before catalytic converter | Heated oxygen sensor 2 in front of catalytic converter |
| 22 | M | Ground Oxygen sensor after catalytic converter | Heated oxygen sensor 1 behind catalytic converter |
| 23 | E | Signal Activation, main relay | DME relay |
| 24 | M | Ground Oxygen sensor after catalytic converter | Heated oxygen sensor 2 behind catalytic converter |
