Advertising:
Siemens MS43 Pinout: Difference between revisions
From MS4X Wiki
Line 483: | Line 483: | ||
=X60004 - Vehicle= | =X60004 - Vehicle= | ||
{| class="wikitable | {| class="wikitable" style="vertical-align:middle;" | ||
|- style="font-weight:bold; text-align:center;" | |- style="font-weight:bold; text-align:center;" | ||
! colspan="6" | X60004 40-pin | ! colspan="6" | X60004 40-pin |
Revision as of 10:55, 16 August 2023
Note: Some pins were intended to be used in further developement stages, but never in actual production. We marked them grey in the following table.
X60001 - Voltage Supply
X60001 9-pin | |||||
---|---|---|---|---|---|
Pin | Type | Name | Wire | Description / Signal type | Connection / Measuring notes |
1 | Input | U_15 | 0.5 GN | Voltage Supply Terminal 15 | Fuel Injector Relay K6327 |
2 | |||||
3 | I/O | D_TXD2 | 0.5 WS/VI | Diagnostic Link TXD | K-Line |
4 | Ground | 31E | 1.5 BR/OR | Ground | Ground Connector X6454 |
5 | Ground | 31L | 1.5 BR | Ground | Ground Connector X6458 |
6 | Ground | 31L | 1.5 BR | Ground | Ground Connector X6458 |
7 | Input | 30H<102 | 1.5 RT | Voltage Supply Terminal 30 | B+ Potential Distributor A2076 |
8 | Input | U_HR<2 | 1.5 RT/WS/GE | Voltage Supply Terminal 87 | Fuse Carrier Engine Electronics A8680 |
9 | Input | U_HR<2 | 1.5 RT/WS/GE | (optional) Fuel Injector Supply Voltage | (optional) Fuel Injector Relay K6327 |
X60002 - Peripherals
X60002 24-pin | |||
---|---|---|---|
Pin | Type | Description / Signal type | Connection / Measuring notes |
1 | Output | [PWM] O2 Sensor Heater Pre-Cat Bank 1 | Heated O2 Sensor Pre-Cat Bank 1 B62101 |
2 | Input | [0-5V] Signal EGT Sensor Pre-Cat Bank 1 | Never Used In Production |
3 | I/O | Gearbox CAN-Low | Transmission Control Unit A7000 (AT/SMG only) |
4 | I/O | Gearbox CAN-High | Transmission Control Unit A7000 (AT/SMG only) |
5 | Input | [0-5V] Signal EGT Sensor Pre-Cat Bank 2 | Never Used In Production |
6 | I/O | Gearbox Diagnostic Link TXD2 | Transmission Control Unit A7000 (AT/SMG only) |
7 | Output | [PWM] O2 Sensor Heater Post-Cat Bank 1 | Heated O2 Sensor Post-Cat Bank 1 B62102 |
8 | Ground | EGT Sensor Pre-Cat Bank 1 | Never Used In Production |
9 | Ground | EGT Sensor Pre-Cat Bank 2 | Never Used In Production |
10 | Ground | EGT Sensor Post-Cat Bank 1 | Never Used In Production |
11 | Ground | EGT Sensor Post-Cat Bank 2 | Never Used In Production |
12 | Input | [0/1] Pencil Coil Detection | Voltage Supply Terminal 87 if pencil style ignition coils are equipped |
13 | Output | [PWM] O2 Sensor Heater Pre-Cat Bank 2 | Heated O2 Sensor Pre-Cat Bank 2 B62201 |
14 | Input | [0-5V] Signal O2 Sensor Pre-Cat Bank 1 | Heated O2 Sensor Pre-Cat Bank 1 B62101 |
15 | Input | [0-5V] Signal O2 Sensor Pre-Cat Bank 2 | Heated O2 Sensor Pre-Cat Bank 2 B62201 |
16 | Input | [0-5V] Signal O2 Sensor Post-Cat Bank 1 | Heated O2 Sensor Post-Cat Bank 1 B62102 |
17 | Input | [0-5V] Signal EGT Sensor Post-Cat Bank 2 | Never Used In Production |
18 | Input | [0-5V] Signal O2 Sensor Post-Cat Bank 2 | Heated O2 Sensor Post-Cat Bank 2 B62202 |
19 | Output | [PWM] O2 Sensor Heater Post-Cat Bank 2 | Heated O2 Sensor Post-Cat Bank 2 B62202 |
20 | Ground | O2 Sensor Pre-Cat Bank 1 | Heated O2 Sensor Pre-Cat Bank 1 B62101 |
21 | Ground | O2 Sensor Pre-Cat Bank 2 | Heated O2 Sensor Pre-Cat Bank 2 B62201 |
22 | Ground | O2 Sensor Post-Cat Bank 1 | Heated O2 Sensor Post-Cat Bank 1 B62102 |
23 | Output | [0/1] ECU Main Relay Control | ECU Main Relay K6300 |
24 | Ground | O2 Sensor Post-Cat Bank 2 | Heated O2 Sensor Post-Cat Bank 2 B62202 |
X60003 - Engine
X60003 52-pin | |||
---|---|---|---|
Pin | Type | Description / Signal type | Connection / Measuring notes |
1 | Input | [0-5V] Signal Hot Film Mass Air Flow Sensor | Hot Film Mass Air Flow Sensor |
2 | Input | Signal Exhaust Camshaft Sensor | Exhaust Camshaft Sensor |
3 | Output | Spare Output 1 | Never Used In Production |
4 | |||
5 | Input | Signal Intake Camshaft Sensor | Intake Camshaft Sensor |
6 | |||
7 | Output | [+5V] Voltage Supply Electric Throttle Body | Electric Throttle Body |
8 | Input | Signal Crankshaft Sensor | Crankshaft Sensor |
9 | |||
10 | Input | [0-5V] Signal Electric Throttle Body Potentiometer 2 | Electric Throttle Body |
11 | Output | Spare Output 3 | Never Used In Production |
12 | |||
13 | |||
14 | |||
15 | Ground | Exhaust Camshaft Sensor | Exhaust Camshaft Sensor |
16 | |||
17 | Ground | Hot Film Mass Air Flow Sensor | Hot Film Mass Air Flow Sensor |
18 | Ground | Intake Camshaft Sensor | Intake Camshaft Sensor |
19 | Input | [0-5V] Signal Electric Throttle Body Potentiometer 1 | Electric Throttle Body |
20 | Ground | Electric Throttle Body | Electric Throttle Body |
21 | Input | Ground Crankshaft sensor | Crankshaft sensor |
22 | Output | [0-5V] Signal Intake Air Temperature | Intake Air Temperature Sensor |
23 | Ground | Intake Air Temperature | Intake Air Temperature Sensor |
24 | Output | [0-5V] Signal Coolant Temperature | Coolant Temperature Sensor |
25 | Ground | Coolant Temperature | Coolant Temperature Sensor |
26 | |||
27 | Output | [0-5V] Signal Engine Oil Temperature | Oil Temperature Sensor |
28 | Ground | Engine Oil Temperature | Oil Temperature Sensor |
29 | Input | Signal Knock Sensor 1A | Knock Sensor Cylinder 1-3 |
30 | Input | Signal Knock Sensor 1B | Knock Sensor Cylinder 1-3 |
31 | Input | Signal Knock Sensor 2A | Knock Sensor Cylinder 4-6 |
32 | Input | Signal Knock Sensor 2B | Knock Sensor Cylinder 4-6 |
33 | Output | [0/1] Signal Fuel Injector Cylinder 1 | Fuel Injector Cylinder 1 Y6101 Pin 1 |
34 | Output | [0/1] Signal Fuel Injector Cylinder 2 | Fuel Injector Cylinder 2 Y6102 Pin 1 |
35 | Output | [0/1] Signal Fuel Injector Cylinder 3 | Fuel Injector Cylinder 3 Y6103 Pin 1 |
36 | Output | [0/1] Signal Fuel Injector Cylinder 4 | Fuel Injector Cylinder 4 Y6104 Pin 1 |
37 | Output | [0/1] Signal Fuel Injector Cylinder 5 | Fuel Injector Cylinder 5 Y6105 Pin 1 |
38 | Output | [0/1] Signal Fuel Injector Cylinder 6 | Fuel Injector Cylinder 6 Y6106 Pin 1 |
39 | |||
40 | Output | [PWM] Signal VANOS Intake Solenoid | VANOS Intake Solenoid |
41 | Output | [PWM] Signal VANOS Exhaust Solenoid | VANOS Exhaust Solenoid |
42 | Output | [PWM] Signal Fuel Tank Vent Valve | Fuel Tank Vent Valve |
43 | Output | [H-Bridge] Electric Throttle Body Actuator 1 | Electric Throttle Body |
44 | Output | [H-Bridge] Electric Throttle Body Actuator 2 | Electric Throttle Body |
45 | Output | [0/1] Characteristic Map Cooling Thermostat | Thermostat |
46 | Output | [H-Bridge] Idle Speed Actuator Closing Coil | Idle Speed Actuator |
47 | Output | [H-Bridge] Idle Speed Actuator Opening Coil | Idle Speed Actuator |
48 | Ground | Shield Knock Sensors | Knock Sensors |
49 | Output | [0/1] Variable Intake Manifold Flap (VIM/DISA) | Variable Intake Manifold Flap (VIM/DISA) |
50 | |||
51 | Output | [PWM] DMTL Heater | Diagnostic Module Fuel Tank Leakage (With Heater) |
52 | Output | [0/1] Signal Secondary Air Pump Valve | Secondary Air Pump Valve |
X60004 - Vehicle
X60004 40-pin | |||||
---|---|---|---|---|---|
Pin | Type | Name | Wire | Description / Signal type | Connection / Measuring notes |
1 | |||||
2 | |||||
3 | Output | S_SLP | 0.35 BR/BL | [0/1] Signal Secondary Air Pump Relay | Secondary Air Pump Relay |
4 | Output | T_ELUE | 0.50 SW/GN | [PWM] Signal Electric Cooling Fan | Electric Cooling Fan |
5 | Ground | M_SHFM | 0.50 SW/GE | Secondary Air Pump MAF Sensor | Secondary Air Pump MAF Sensor |
6 | |||||
7 | Ground | M_FWG1 | 0.35 BR/GN | Pedal Value Sensor | Accelerator Pedal |
8 | Input | A_FWG1 | 0.35 WS | [0-5V] Signal Pedal Value Sensor 1 | Accelerator Pedal |
9 | Output | U_FWG1 | 0.35 GE | [+5V] Supply Voltage 1 Pedal Value Sensor | Accelerator Pedal |
10 | Input | S_EKP | 0.35 SW/VI | Signal Fuel Pump Relay | Fuel Pump Relay |
11 | |||||
12 | Ground | M_FWG2 | 0.35 BR | Pedal Value Sensor | Accelerator Pedal |
13 | Input | A_FWG2 | 0.35 WS/GN | [0-5V] Signal Pedal Value Sensor 2 | Accelerator Pedal |
14 | Output | U_FWG2 | 0.35 GE/GN | [+5V] Supply Voltage 2 Pedal Value Sensor | Accelerator Pedal |
15 | Input | A_SHFM | 0.50 SW/RT | [0-5V] Signal Secondary Air Pump MAF Sensor | Secondary Air Pump MAF Sensor |
16 | Output | Spare Output 4 | Never Used In Production | ||
17 | Output | F_TD | 0.35 SW | Engine Speed Signal | OBD-II Connector |
18 | Output | S_AKL | 0.50 GR/VI | [0/1] Signal Exhaust Flap Valve (M54B25xi & M54B30 Only) | Exhaust Flap Valve |
19 | Output | ||||
20 | Input | DMTL | 0.50 SW/GN | [0-5V] Signal Diagnostic Module Fuel Tank Leakage (DMTL) | Diagnostic Module Fuel Tank Leakage |
21 | |||||
22 | Input | F_DFAHR | 0.35 WS/GN | Signal Processed Wheel Speed Sensor Rear Right | ABS/ASC or ABS/DSC Control Unit |
23 | Input | S_KUP | 0.35 BL/BR | [0-5V] Signal Clutch Switch | Clutch Switch |
24 | Input | S_BLS | 0.35 BL/RT | [0-5V] Signal Brake Light Switch (BLS) | Light Control Module |
25 | |||||
26 | Input | 15<29 | 0.50 GN/VI | Voltage Supply Terminal 15 | Fuse F29 |
27 | Input | FGRS | 0.35 BL/SW | Data Link Multi Function Steering Wheel | Volute Spring Steering Wheel |
28 | Input | S_BLTS | 0.35 BR/GR | [0-5V] Signal Brake Light Test Switch (BTS) | Brake Light Switch |
29 | Output | S_KOREL | 0.50 SW/BL | [0/1] Signal A/C Compressor Relay (ACC_RLY) | A/C Compressor Relay |
30 | Output | DMTLP | 0.75 BR/BL | [0/1] Signal Diagnostic Module Fuel Tank Leakage Pump (DMTL) | Diagnostic Module Fuel Tank Leakage |
31 | |||||
32 | I/O | D_TXD2 | 0.50 WS/VI | Engine Diagnostic Link TXD | OBD-II Connector |
33 | I/O | D_EWS | 0.35 SW/VI | Electronic Vehicle Immobilisation Crosslink | Electronic Vehicle Immobilisation Unit (EWS) |
34 | Input | [0-5V] Input Fuel Cap Status Switch | Diagnostic Module Fuel Tank Leakage | ||
35 | Ground | 31 | 0.50 BR/OR | Cruise control interface | Cruise control interface (Z3 only) |
36 | I/O | D_CAN--H | 0.50 GE/RT | CAN High | CAN Bus Connector |
37 | I/O | D_CAN--L | 0.50 GE/BR | CAN Low | CAN Bus Connector |
38 | Ground | M_TKA | 0.35 SW/GN | Coolant Outlet Temperature | Coolant Outlet Temperature Sensor |
39 | Input | A_TKA | 0.35 SW/GR | [0-5V] Signal Coolant Outlet Temperature | Coolant Outlet Temperature Sensor |
40 |
X60005 - Ignition
X60005 9-pin | |||||
---|---|---|---|---|---|
Pin | Type | Name | Wire | Description / Signal type | Connection / Measuring notes |
1 | Output | P_ZSZ3 | 1.5 SW/GE | Ignition Signal Cylinder 3 | Ignition Coil Cylinder 3 |
2 | Output | P_ZSZ2 | 1.5 SW/RT | Ignition Signal Cylinder 2 | Ignition Coil Cylinder 2 |
3 | Output | P_ZSZ1 | 1.5 SW/WS | Ignition Signal Cylinder 1 | Ignition Coil Cylinder 1 |
4 | |||||
5 | Ground | 31L | 2.5 BR | Ignition Coil Ground | Ground Connector X6458 |
6 | Input | A_ZSR | 0.5 BR | Signal Feedback Ignition Coils | Ignition Coil Wiring Harness |
7 | Output | P_ZSZ6 | 1.5 SW/VI | Ignition Signal Cylinder 6 | Ignition Coil Cylinder 6 |
8 | Output | P_ZSZ5 | 1.5 SW/GN | Ignition Signal Cylinder 5 | Ignition Coil Cylinder 5 |
9 | Output | P_ZSZ4 | 1.5 SW/BL | Ignition Signal Cylinder 4 | Ignition Coil Cylinder 4 |